ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

26 Short guide ChromGate®, KNAUER Instrument Control
Fig. 24 Run Sequence dialog box
Reporting
Enter the name of your sequence file by typing the name, along with
path, in the Sequence Name field. You can also select it from a list of
sequence files on your disk by clicking the File button next to the field.
Leave the other parameters as their defaults.
Prepare your autosampler to inject your standard sample, followed by 3
unknown samples. When you are ready to inject your first sample, click
Start. When the sequence is completed, you will have acquired and
saved the data files for one standard and three unknown runs, and
generated a simple result report for each unknown sample and a
summary report for the sequence.
Since you have not yet defined a sequence summary report, do not
check the box to print sequence reports.
ChromGate ® Client/Server comes with a complete suite of report
templates that can be used without modification to generate reports. To
see an example of one of these reports, use the Reports/View/Area%
command from the menu bar. (Make sure your current chromatogram
has been analyzed first.) The standard report will appear in a window on
your screen.
Fig. 25 Area% Report
If your method contains no defined custom report, the system will use the
standard report formats to print reports when required.