ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

44 Setup and Control of Knauer HPLC Systems
Enter additional information or comments to be printed out when you print
the instrument configuration.
Without the correct serial number, the communication with the
pumps cannot be established.
When complete, click OK to exit the dialog and return to the instrument
configuration icon list.
Configuration – Kontron Pumps
For each pump (320/322/325, 420/422/425, or 520/522/525) in the
Configured Modules window, double-click the icon and complete the
configuration dialog. You have to make sure that all settings correspond
to the settings at the pumps their selves. The configuration windows of all
Kontron pumps (Fig. 59) look very similar that they can be described
together.
Fig. 59 Kontron Pumps configuration window
Name
The name of the selected pump appears automatically. You can enter
any other descriptive name for the pump. This name will appear on the
pump tab when the instrument setup or status windows are displayed.
Use a name which is unique within the instrument.
Pump Type
Select the type of pump you want to configure from the drop-down list.
Gradient Mode
In case of the 3xx pumps it is automatically set to isocratic and for the 5xx
pumps to LPG. For the 4xx pumps the choices are HPG A, HPG B, or
HPG C.
Head
Select the type of pump head you are using from the drop-down list. The
choices are Analytical, Micro, and Semi Prep for all Kontron pumps.