ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

160 Creating an Instrument Control Method
Click on the small arrow key of the drop-down menu. The menu shows
a list of possible valve positions. For Knauer two-position valves the
positions are I (injection) and L (load), for Valco two-position valves A and
B and for multi-position valves 1 – 16, depending on the valves
configuration. That means, for a 6-position valves the available positions
are 1 – 6, for a 16-position valve 1 – 16.
GLP
The GLP section of the ASM 2.1L status window allows for reading-out
the GLP data of all modules of the ASM 2.1L.
Fig. 237 ASM2.1L status tab – GLP (UV)
Click on the button to read-out the GLP information of the
built-in modules. You can use the scroll bar to scroll through the GLP
data. The following GLP information will be shown:
Instrument data
Serial number
Firmware version
Instrument installation date
Last service date
Last service code
Device working time (in hours)
Pumps
Pump head
Pump operation time
UV
Lamp operation time (in hours)
Number of lamp ignitions
Optical bandwidth (in nm)
Light intensity I-Sig at UV-max
Light intensity I-Ref at UV-max
Valve(s) (for Knauer and Valco valves)
Valve type (number of ports and positions)
Switching cycles
System
The System section of the ASM 2.1L status window allows for changing
the Events of the ASM 2.1L and the access for the UV Diagnostics, if an
UV detector is configured.
Fig. 238 ASM2.1L status tab – System with UV Diagnostics