ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

Setup and Control of Knauer HPLC Systems 67
Fig. 95 Tray configuration for the autosampler 3950 with option Use Mix & Dilute
For µl pick-up no transport vial must be chosen. For the tray type 84+3
vials the transport vial can be selected in the method setup, for all other
tray types the transport liquid will be taken from the bottle with wash
solution.
All configuration settings will be transmitted to the autosampler if
the instrument will be opened. In difference to the other Sparkmanufactured
autosamplers, the configuration data will not be
stored permanently into the device and compared with your
settings. However, please make sure, that the configuration settings
are correct due to that the device will take over your settings
without verification.
When complete, click OK to exit the dialog and return to the instrument
configuration icon list.
Configuration – Autosampler Knauer Optimas
Fig. 96 Configuration window for the autosampler Knauer Optimas
Name
Enter a descriptive name for the sampler. This name will appear on the
autosampler tab when the instrument setup or status windows are
displayed. Use a name which is unique within the instrument.
Serial Number
Type in the serial number of the detector you are using.