ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

220 ChromGate® PDA Option
Fig. 318
Report peak spectra
Detected on
This allows the user to select the channel or channels from which peaks
will be detected.
Limit to named peaks only
This allows the user to restrict the peak selection (made above) to a time
range. When checked, only peaks within the specified time range will be
searched. When this box is unchecked, the Time Range edit fields are
disabled.
Limit Peaks to time range
This allows the user to restrict the peak selection (made above) to a time
range. When checked, only peaks within the specified time range will be
searched. When this box is unchecked, the Time Range edit fields are
disabled.
Time Range
This allows the user to restrict the peak selection (made above) to a time
range. When the Limit to time range box is unchecked, these fields are
disabled.
Report information
Checking any of these controls indicates that the indicated value will be
calculated and printed to the right of the graph. Unchecking values that
are not of interest will speed up analysis.
Peak Area
Checking this indicates that the peak area should be printed to the right
of the spectrum graph.
Lambda Max
Checking this indicates that the three largest lambda max values should
be printed to the right of the spectrum graph.
Lambda Min
Checking this indicates that the three largest lambda min values should
be printed to the right of the spectrum graph.
Total Purity
Checking this indicates that total peak purity should be printed to the right
of the spectrum graph.