ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

280 SEC Option
Fig. 386
Fig. 387
Select the trace for which you want to generate the slice report from the
drop-down list.
Select the Specified Range button if you want to report slices within a
certain time range. Enter a Start Time and Stop Time for the range you
wish slices to be reported. Otherwise, select the All Slices button.
A table place-holder will appear on your report. To view the current
results, do a right-hand mouse click and select the Show Data at Design
Time option.
Adding an SEC Summary Report
To add a summary report to your custom report, do a right hand mouse
click and select Insert Report/SEC Summary Report. A dialog will
appear where you select the trace for the summary.
Select the trace for the report, and click OK.
A table placeholder will appear on your report. To view the current report
data, click the right mouse button in the table, and select Show Data at
Design Time.
SEC Summary information
Channel A
Processing Start Time (min) 12.831
Processing Stop Time (min) 25.859
Number of Slices 39
Weight Average Molecular Mass 552812
Number Average Molecular Mass 76133
Z Average Molecular Mass 1250191
Z+1 Average Molecular Mass 1847926
Polydispersityindex 7.261
Peak Molecular Mass 183506
Z Average / Weight Average 2.262
Z+1 Average / Weight Average 3.343
Saving an SEC Report Template
If you plan to use the same report for all your SEC methods, you can
save the custom report as a template, which can then be opened from