ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

12 Installation Guide ChromGate® 3.3.2
Fig. 7
Fig. 8
The following window will be displayed when the installation has
completed.
Click on “Finish” to finalize the KNAUER fraction collectors AddOn
installation.
The installer for the Generic Drivers can be found in
ChromGate\GenericDrivers\Disk1. The installation is only required, if you
wants to control one of the devices, supported via the Generic Driver.
Generic drivers only allow for basic control of devices.
When using a DAD K-2700 or K-2800 with a PCI interface card, the driver
for the interface card must be installed. This driver can be found on the
ChromGate CD in ChromGate\Drivers. If the interface card has been
installed, after a re-start, Windows will ask for the driver.
Start ChromGate once in Demo Mode by clicking Start – All programs –
Chromatography – EZChrom Elite (default settings; refer the EZChrom
Elite installation guide).
Close ChromGate. Insert the USB license dongle into a free USB port of
the enterprise machine. Start ChromGate. The license will be recognized
and can be used.