ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

More documents

Recommendations

Info

ChromGate® PDA Option 215 Fig. 314 Hits Displayed Select the number of hits you wish to display. Hits will be displayed in order of similarity. Search Select Method if you want to use the parameters from the current method for your search. Select Quick if you want to enter or change the parameters yourself before the search. Display Parameters Click this button if you want to display the parameters. If you always use the method parameters, you may not wish to display them when you search. Search Now When you click this button, a library search will be performed on the selected spectra using the parameters, and the number of hits requested will be displayed. Search Spectrum Click the arrow to select a new spectrum to search on. You can choose from the current data, or from a stored spectrum file. The current spectra source will be displayed. Search Parameters This tab contains search parameters. If you have elected to use the Method search parameters, the parameters displayed will be those in your current method in the PDA Options/Library tab. If you have elected to do a Quick search, the parameters will be default parameters. Wavelength Range These specify the wavelength range over which the library search will be performed. Wavelength Step This specifies the data point spacing to be used when a library search is performed. Max Hits This specifies the number of hits that will be reported in the results of a library search. Note that this works in conjunction with the Similarity Threshold parameter to limit the number of hits reported. Similarity Threshold Specifying a value for this control will cause the library search results to only display matches whose similarity to the unknown exceeds this value.
216 ChromGate® PDA Option Note that this control works in conjunction with the Max Hits parameter to limit the number of hits reported. Library Displays the library from the method, or for Quick enables you to select a library to be used. Pre-Filters tab When Quick is selected as the Search Mode, the items on this tab allow the user to specify search pre-filters that will be performed on library spectra prior to the test for similarity. All pre-filters are optional. If Method is selected as the Search Mode, the items on this tab are read-only and reflect the parameters values on the Library tab of PDA Options. Retention Time Range When a Retention Time Range is specified, library search will be restricted to those library entries whose retention time is within the specified range. Entries outside this range are automatically excluded from the search (no similarity calculation is made). Entering a value for this is optional. Lambda Max Custom Report When one or more of these values is specified, library search will be restricted to those library entries containing a lambda max within 5 nm of one of the specified values. Entries without a matching lambda max are automatically excluded from the search (no similarity calculation is made). Entering values for this is optional. Compound Name Filter When a Compound Name Filter is specified, library search will be restricted to those library entries whose name contains the specified string as a case-insensitive sub-string. Entries without a matching substring are automatically excluded from the search (no similarity calculation is made). Entering a value for this is optional. A variety of PDA information can be placed in a custom report. These items are inserted in the report by placing the cursor at the location where you want to insert the item, then do a right mouse click to access the custom report menus. PDA Insert Graph Items The Insert Graph menu has the following additional items available when the PDA Option is enabled: 3D Data Graph, and Contour Graph. 3D Data Graph The 3D View provides a three-dimensional view of absorbance versus time and wavelength. Wavelengths of appreciable absorbance and interferences, which may be invisible in a single wavelength plot, are easy to locate with the 3D View. Select this function to automatically enter the 3D map into the report. Click the right-mouse button within the 3D map and select Properties to display the 3D Properties dialog box and enter appropriate changes The 3D map can be elevated and rotated around its axis for display from any angle. These functions work the same as in the 3D view window.
Page 1 and 2:
Software ChromGate ® Chromatograph
Page 3 and 4:
4 CONTENTS Configuration - Autosamp
Page 5 and 6:
6 CONTENTS Peak Table .............
Page 7 and 8:
8 Installation Guide ChromGate® 3.
Page 9 and 10:
10 Installation Guide ChromGate® 3
Page 11 and 12:
12 Installation Guide ChromGate® 3
Page 13 and 14:
14 Short guide ChromGate®, KNAUER
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
32 Setup and Control of Knauer HPLC
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
84 Creating an Instrument Control M
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
100 Creating an Instrument Control
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164: 164 Creating an Instrument Control
Page 169 and 170: 170 Knauer Instrument Control Metho
Page 185 and 186: 186 ChromGate® System Suitability
Page 187 and 188: 188 ChromGate® System Suitability
Page 189 and 190: 190 ChromGate® PDA Option Fig. 283
Page 191 and 192: 192 ChromGate® PDA Option calculat
Page 193 and 194: 194 ChromGate® PDA Option (to the
Page 195 and 196: 196 ChromGate® PDA Option PDA View
Page 213: 214 ChromGate® PDA Option Fig. 313
Page 221 and 222: 222 PDA Analysis and Calculations c
Page 223 and 224: 224 PDA Analysis and Calculations s
Page 225 and 226: 226 PDA Analysis and Calculations u
Page 227 and 228: 228 PDA Analysis and Calculations 3
Page 229 and 230: 230 ChromGate® Preparative Option
Page 257 and 258: 258 SEC Option Universal Calibratio
Page 259 and 260: 260 SEC Option Fig. 369 Acquisition
Page 261 and 262: 262 SEC Option Amount Values In thi
Page 263 and 264: 264 SEC Option Fig. 373 SEC peak an
Page 265 and 266:
266 SEC Option Fig. 376 Fig. 377 Yo
Page 267 and 268:
268 SEC Option Fig. 379 Enable Anal
Page 269 and 270:
270 SEC Option Export settings Clic
Page 271 and 272:
272 SEC Option All samples analyzed
Page 273 and 274:
274 SEC Option Horizontal Baseline
Page 275 and 276:
276 SEC Option Intrinsic Viscosity
Page 277 and 278:
278 SEC Option Fig. 383 information
Page 279 and 280:
280 SEC Option Fig. 386 Fig. 387 Se
Page 281 and 282:
282 SEC Option single variable sear
Page 283 and 284:
284 Typical Wiring Schemes Typical
Page 285 and 286:
286 Typical Wiring Schemes Fig. 390
Page 287 and 288:
288 Typical Wiring Schemes Fig. 392
Page 289 and 290:
290 Fig. 394 Pump K-1001 / Autosamp
Page 291 and 292:
292 Index Device ID Autosampler 68,
Page 293 and 294:
294 Index R Rack configuration 243
Page 295:
© ® Wissenschaftliche Gerätebau
show all

ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?