ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

168 Creating an Instrument Control Method
Instrument Status – Column Oven 4050 and Jetstream
Fig. 246 Status tab, column oven 4050
Fig. 247 Status tab, column oven Jetstream
To achieve the communication with the column oven Jetstream its
control unit must display choose function as it does after powering
up. Otherwise communication can be established, but the oven will
not execute commands sent by software.
Monitor
Run Status
The status HOLD will be displayed when no program is running;
otherwise the Run Status displays a run time in minutes elapsed since
the start of the run.
State
The state On(Idle) or Off will be indicated if the oven will be controlled or
not.
Temperature (°C)
The actual oven temperature will be shown.
Cooler Temperature (°C) (S 4050 only)
The actual cooler temperature will be shown.
Digital Outs (Events) (S 4050 only)
The current state for the digital outs will be displayed in this control. The On
state is represented by an active red Light Emission Diode LED symbol
( ). The Off state is represented by an inactive LED symbol ( ).