ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

250 ChromGate® Preparative Option
To change the settings for colors, font type etc., open the
chromatogram’s appearance (right mouse click on the chromatogram –
Appearance). Select the correct detector channel in Trace and select the
annotation you want to change the settings for.
Fig. 358 Chromatogram - FRC Appearance
Please note, that for report previews as well as for pdf prints, the fraction
color will not be shown correctly (always pink/yellow). If the report is been
printed with a “physical” printer, the colors are as selected in the
Appearances menu.
Stacked Injection
The option Stacked Injection allows to perform injection during a run. As
an injection device the autosampler 3950 or the Injection Module can be
used. For the configuration and instrument setup of the autosampler
3950, please refer the appropriate chapters.
Injection module configuration
The injection module will be installed with the Knauer FRC AddOn. In the
instrument configuration dialog, select the injection module and add it to
the Configured modules. Note that it is not allowed to add an autosampler
and the injection module.
Fig. 359 Injection module configuration window
The injection module consists of a pump and a Knauer 2-position
switching valve. Optional an injection loop can be used. As a pump a
pump P 2.1L, P 2.1S, P 4.1S, S 100, S 1050 or 1800 can be selected. If