ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

172 Knauer Instrument Control Method Options
Fig. 252 Advanced Runtime Settings – System wake-up… - date setting
If enabled, this option is valid for the currently used computer.
Trace name
If the option “Trace name” is enabled, the wave length of the initial line of
the wave length table becomes part of the trace name in the
chromatogram window as well as in the report (chromatogram, channel
name in run report) instead of the channel name. This belongs to all
detectors with a wave length table, as UV, DAD and fluorescence
detectors. The channel name in the channel selector will not be changed.
Fig. 253 Advanced Runtime Settings – Trace name changes
The option will only change the trace name for new chromatograms.
If enabled, this option is valid for all instruments of the Enterprise; it
is not limited on the currently used instrument or computer. That
means, that the trace name will include the wave length for all
instruments and therefore for all methods that will be stored on the
mentioned Enterprise machine.
Download Tab / Method
The actually set parameters (may be even not saved) of the current
instrument setup tab as well as those of the whole method can be
downloaded to the corresponding instruments. Select the menu
CONTROL – DOWNLOAD METHOD or
CONTROL – DOWNLOAD TAB
Trace name not changed
Trace name changed