ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

More documents

Recommendations

Info

ChromGate® Preparative Option 253 Number of Injections Enter the number of stacked injections. If you, e.g., enter “5”, two stacked injections will be made; in addition of the initial injection 6 injections at all will be made per run. Please make sure that you have enough samples for the entered number of injection. Injection Volume Enter the desired injection volume in ml. Injection Flow Enter the flow rate of the injection pump during the injection. If no injection is prepared, the pump is stopped. During a run the injection module’s pump can only be controlled using the option “Direct control during a run” (please refer the manual’s appropriate chapter Runtime Settings, page 141). Injection Duration The duration of the injection is calculated from the injection volume and the injection flow. The reduced flow during start and stop of the pump is taken into account with 6 seconds in sum. Time between Injections (min) Enter the time between the injections. The value must be higher than the time calculated for the injection duration. Click the Apply-button to apply the settings into the Stacked injections table. Fig. 363 Injection module Stacked injection table If you make a right mouse click on the table, you can select - Fill Down, to fill the table with the same settings as in the selected line - Insert Line, to add a new line - Delete Line, to delete the selected line - Delete Lines, to delete all selected lines - Fill Table…, will open the Stacked injection setup again. The new table will overwrite the existing one. If you select the command Fill table to open the setup dialog for the stacked injection table, the window will show default values for all parameters, beside the sample preparation time. Click on OK to close the Stacked Injections table window; the injection module instrument setup window will be shown. In the Aux Traces tab a trace “Stacked Inj. [Inj. Module]” can be enabled. The trace will show the start of the sample preparation and the stacked injection.
254 ChromGate® Preparative Option Fig. 364 Injection Module Stacked injections auxiliary trace Fig. 365 Injection Module Stacked injections trace For every stacked injection an entry for the sample preparation and the injection will be made. Fig. 366 Injection Module Stacked injections instrument activity log entry Injection module instrument status If you open the instrument status, you will find an own tab for the injection module.
Page 1 and 2:
Software ChromGate ® Chromatograph
Page 3 and 4:
4 CONTENTS Configuration - Autosamp
Page 5 and 6:
6 CONTENTS Peak Table .............
Page 7 and 8:
8 Installation Guide ChromGate® 3.
Page 9 and 10:
10 Installation Guide ChromGate® 3
Page 11 and 12:
12 Installation Guide ChromGate® 3
Page 13 and 14:
14 Short guide ChromGate®, KNAUER
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
32 Setup and Control of Knauer HPLC
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
84 Creating an Instrument Control M
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
100 Creating an Instrument Control
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
170 Knauer Instrument Control Metho
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
186 ChromGate® System Suitability
Page 187 and 188:
188 ChromGate® System Suitability
Page 189 and 190:
190 ChromGate® PDA Option Fig. 283
Page 191 and 192:
192 ChromGate® PDA Option calculat
Page 193 and 194:
194 ChromGate® PDA Option (to the
Page 195 and 196:
196 ChromGate® PDA Option PDA View
Page 197 and 198:
Page 199 and 200:
Page 201 and 202: 202 ChromGate® PDA Option Fig. 295
Page 215 and 216: 216 ChromGate® PDA Option Note tha
Page 221 and 222: 222 PDA Analysis and Calculations c
Page 223 and 224: 224 PDA Analysis and Calculations s
Page 225 and 226: 226 PDA Analysis and Calculations u
Page 227 and 228: 228 PDA Analysis and Calculations 3
Page 229 and 230: 230 ChromGate® Preparative Option
Page 251: 252 ChromGate® Preparative Option
Page 257 and 258: 258 SEC Option Universal Calibratio
Page 259 and 260: 260 SEC Option Fig. 369 Acquisition
Page 261 and 262: 262 SEC Option Amount Values In thi
Page 263 and 264: 264 SEC Option Fig. 373 SEC peak an
Page 265 and 266: 266 SEC Option Fig. 376 Fig. 377 Yo
Page 267 and 268: 268 SEC Option Fig. 379 Enable Anal
Page 269 and 270: 270 SEC Option Export settings Clic
Page 271 and 272: 272 SEC Option All samples analyzed
Page 273 and 274: 274 SEC Option Horizontal Baseline
Page 275 and 276: 276 SEC Option Intrinsic Viscosity
Page 277 and 278: 278 SEC Option Fig. 383 information
Page 279 and 280: 280 SEC Option Fig. 386 Fig. 387 Se
Page 281 and 282: 282 SEC Option single variable sear
Page 283 and 284: 284 Typical Wiring Schemes Typical
Page 285 and 286: 286 Typical Wiring Schemes Fig. 390
Page 287 and 288: 288 Typical Wiring Schemes Fig. 392
Page 289 and 290: 290 Fig. 394 Pump K-1001 / Autosamp
Page 291 and 292: 292 Index Device ID Autosampler 68,
Page 293 and 294: 294 Index R Rack configuration 243
Page 295: © ® Wissenschaftliche Gerätebau
show all

ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?