ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

80 Setup and Control of Knauer HPLC Systems
It is not possible to use the cinch connector and the WAGO
connector from the same channel for different instruments. They are
not independent of each other.
When complete, click OK to exit the dialog and return to the instrument
configuration icon list.
Configuration – Column Oven 4050, Column Oven Jetstream
Select the Smartline column oven 4050 or the Jetstream in the
Configured Modules window, double-click the icon and complete the
configuration dialog.
Fig. 113 Configuration window for the column oven 4050
Name
Enter a descriptive name for the oven. This name will appear on the oven
tab when the instrument setup or status windows are displayed. Use a
name which is unique within the instrument.
Serial Number
Type in the serial number of the device you are using.
Temperature units (column oven 4050 only)
Select from the drop down list either °C or °F.
Interface
Select the Interface you want to use for communication with the device.
Fig. 114 Available interfaces column oven 4050
RS-232
Select the number for the RS-232 communication port (COM Port)
on your PC to which the column oven is connected.
LAN
Fig. 115 LAN interface dialog
To let the software search for your already connected and switchedon
device, click on the button to start the search for all connected
LAN devices of the currently configured type. The option “Use S/N to
identify the instrument” must be enabled. Select the desired device
from the shown list. The software will read-out the information as
serial number and will fill it automatically into the configuration