ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

84 Creating an Instrument Control Method
Instrument Setup
For details on other aspects of method development (e.g. calibration,
integration) and sequence operations, please refer to the ChromGate ®
Data System Reference Manual.
The instrument setup portion of your method displays how the devices
(pumps, detectors, autosamplers, switching valves) are to be controlled
and how data is to be acquired. This information is entered in the
Instrument Setup dialog. Click the Instrument Setup button , or
select Method – Instrument Setup from the menu. A window will appear
which displays the parameters required for the equipment configured for
this instrument.
Fig. 120 Instrument setup window (Smartline Pump 1050)
For each of the single configured devices you get a separate tab in the
instrument setup window. Each of these contains several areas where
you can enter parameters related to the individual device.
In any case you find at the bottom a unique graph part displaying the
wavelength flow, gradient and possibly other related profiles.
With a right-hand mouse click you get access to multiple setup
possibilities of the profile. For details see the ChromGate ® Data System
User’s Manual.
The definition and setups of triggers (see page 135) and auxiliary traces
(see page 135) must be performed in a separate tab for the whole
instrument, not in the tabs of the single devices.