ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

134 Creating an Instrument Control Method
Fig. 193 Setup window, column oven Jetstream
For details on the spreadsheet operations, refer to the section Creating a
Time (Gradient) Program as described in the chapter Instrument Setup –
Pumps, Pump Program.
The oven program profile will be adapted automatically to the
spreadsheet inputs (compare Fig. 192).
Wait before injection
If you are working with a temperature program check this option. The
setting Wait with tolerance (+/- °C) defines the accuracy of the oven
temperature allowing a new injection.
A temperature independent delay between succeeding injections can be
set in the field Wait time (min). The system will wait for that time after
having reached the initial temperature and before the next injection is
performed.
Instrument Setup – Flowmeter
The setup of the flowmeters is the same for all supported models is very
simple.
Fig. 194 Setup window, Flowmeter
Run time
Enter the desired run time.
Acquisition delay
Here you can define a delay time between starting the run and the data
acquisition.