ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

Setup and Control of Knauer HPLC Systems 75
Fig. 104 Tray configuration; transport, reagent, and destination vials
First Transport Vial
Enter the first transport vial position.
Last Transport Vial
Enter the last transport vial position. All the vials from the first up to the
last transport vial must be of the same type.
Transport Vial Segment
Select the type of the segment where the transport vials are installed.
The choices are Standard (A) segment, LSV (B) segment, Super LSV
(C) segment and Micro vial (D) segment. All the vials with transport
solvent must be from one segment type, corresponding to the segment
definition in the upper part of the dialog.
If all conditions for the transport vial definition are met, the selected vial
positions will appear in Fig. 102 highlighted in yellow.
Reagent A/B/C/D / Destination Vial
Enable the corresponding boxes if you want to use the destination vial or
vials with Reagent A/B/C/D.
Reagent A/B/C/D / Destination Vial Position
Select the Reagent A/B/C/D / destination vial position.
Reagent A/B/C/D / Destination Vial Segment
Select the type of the segment where the corresponding vials are
installed. The choices are Standard (A) segment, LSV (B) segment,
Super LSV (C) segment and Micro vial (D) segment.
The Endurance Trays
Fig. 105 Tray configuration for the autosampler Endurance