ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

256 ChromGate® Preparative Option
Fig. 368 Injection module Stacked injections table setup
If you click the Apply-button, the new table will be executed immediately;
the program will not check when the last injection was made.
If the Direct Control during a run-option Save changes in time table is
enabled, all program lines for stacked injections, which have not been
executed yet during the current run, will be replaced by the stacked
injections from the direct control, whereas lines for stacked injections,
which have already been executing during the current run, remain
untouched.
If the Direct control during a run-option Save changes in time table is
not active, the new table will be executed, but not stored in the instrument
setup. However, in this case the method does not include the correct
injection program.