ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

174 Knauer Instrument Control Method Options
METHOD – CONFIGURE SOLVENT…
Fig. 257 Solvent Control dialog box (quaternary LPG)
If you are working with a low pressure gradient system, you can enter the
values for all components in the same window. You can activate the
option for each of the components separately. As many solvents are
configured as many components will be accessible. Consequently, an
isocratic system will give access only to component A.
Check the On option to get a continuously monitored solvent amount for
each pump separately. With this option activated, you have access to
entering the values for the bottle size, actual volume, the acoustic
warning level, and the shutdown level. Accept the entered values and
close the window. If you close the window without having accepted any
changes, those will not become valid.
The actual volume of solvent in each bottle is displayed. The eluent
volume of the symbolized bottles displayed depends on the actual
volume and bottle size.
Fig. 258 Solvent Control window – binary HPG system
If you are working with a high pressure gradient system, again you can
enter the values for all components in the same window. However, only
that component will be accessible, to which the pump was selected.