ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

Setup and Control of Knauer HPLC Systems 35
K-2700 / 2800 Interface Card and Driver Installation
ChromGate ® communicates with the Diode Array Detectors K-2700 and
2800 via either a PCI interface card or LAN. Installation of the necessary
PCI card is described in the detector manual. Please note, that the driver
is not released for Windows Vista or Windows 7. For other PDA detectors
(S 2800, S 2850…) only the LAN interface will work.
Configuring the KNAUER HPLC System
In order to access commands for control of Knauer instruments and
autosamplers, you must configure them appropriately. To access the
configuration screens, locate the icon on the main menu for the
instrument you want to configure.
You must have system administration privileges in order to
configure an instrument.
Fig. 36 ChromGate® main screen
Select File – New to create new instruments or groups:
Fig. 37 Creating new Instrument or Location/Group
If you have selected Instrument, the Instrument Configuration dialog
(see Fig. 38) appears. For already existing instruments right- mouse click
on the instrument, and select the Configure… command.
The Instrument Configuration dialog will appear.