ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

Creating an Instrument Control Method 145
Instrument Status – Detectors
Instrument Status – RI Detectors (S 23[4]00, K-23[4]00/1)
The tabs for all RI detectors appear identical, independent of the features
of the detector. Unavailable features or functions are only grayed and
inaccessible.
Fig. 217 RI-Detector status tab, example: S 2300 / S 2400
Monitor
Run Status
The status HOLD will be displayed when no program is running;
otherwise the Run Status displays a run time in minutes elapsed from the
start of the run.
Signal (µRIU)
The actual signal is indicated in this field. The unit corresponds to the
setting in the configuration.
Direct Control
The direct control option must be activated (see Fig. 249 on page 170).
The buttons Flush and Autozero can be pressed to perform the
corresponding functions. The flush function (flushing for 1 min) is
deactivated during a run. The Autozero defines the current signal as a
zero level.
Instrument Status – UV Detectors
(S 2520, S 2500, S 200, K-200, K-2000/1, K-2500/1)
The tabs for most of the UV detectors appear identical, independent of
the features of the detector. Unavailable features or functions are only
grayed and inaccessible.