ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

ChromGate® PDA Option 219
Fig. 317
Detected on
This allows the user to select the channel or channels from which peaks
will be detected.
Limit to named peaks only
This allows the user to restrict the peak selection (made above) to a time
range. When checked, only peaks within the specified time range will be
searched. When this box is unchecked, the Time Range edit fields are
disabled.
Limit Peaks to time range
This allows the user to restrict the peak selection (made above) to a time
range. When checked, only peaks within the specified time range will be
searched. When this box is unchecked, the Time Range edit fields are
disabled.
Time Range
This allows the user to restrict the peak selection (made above) to a time
range. When the Limit to time range box is unchecked, these fields are
disabled.
Graph Height
This specifies the relative height of a search results graph. A value of
100% corresponds to a standard sized graph. A larger value may be
selected to provide more a detailed plot.
Graph Properties
Pressing this button displays the graph properties dialog as found on the
standard graph.
Spectrum Report
This will display a table showing spectra extracted from peaks of the
chromatogram. Based on the selection on the Spectrum tab of PDA
Options, the report will contain either the apex spectrum, an average of
the upslope, apex and down slope spectra, or several averaged spectra.
To set parameters for this report, do a right mouse click on the table, then
select Properties. The following dialog will appear.