ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

Creating an Instrument Control Method 137
To use this feature, select the Perform Baseline Check option in the
Single Run dialog box or include Baseline Check in the current
Sequence line.
Fig. 199 Activating the baseline check for a single run
Instrument Status of a (running) Control Method
If you have the Instrument Control option installed, and your instrument
configured as a KNAUER HPLC System, the instrument control functions
appear as part of the Instrument Status area of your instrument window.
To access the Instrument window where you can set up your devices and
methods, double–click on the instrument icon you wish to start in the
Main Menu. It may be required that you log-in before you can access the
instrument window functions.
For details on other aspects of method development (calibration,
integration) and sequence operations, see the ChromGate ® Data System
Reference Manual.
System Status
Open the Instrument Status Window using the menu sequence Control –
Instrument Status.
The Instrument Status window contains the status tabs for all configured
instruments, and as shown in the figure below the system status tab,
providing an overview for the whole system.
Fig. 200 Instrument Status window, system status tab, method not running