ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

SEC Option 261
Fig. 370
Run Information
This section allows you to specify files for the run.
Sample ID
Enter a Sample ID for the run. This can contain text and numbers, and is
saved with the data file.
Method
Enter the name of the method to be used for data acquisition and
processing. Include the entire path name if the method is not in your
default method directory. You can select the method from a list of
methods available on your disk by clicking the File button adjacent to the
field.
Data Path
Enter a path name where the data acquired for this run will be stored.
Click the File button to select a path from a list of those on your disk.
Data File
Enter a file name to be used to save the data on disk. You can select a
path by clicking the File button adjacent to the field. It is not possible to
use an existing file name, unless the file exists in located in a directory
whose path contains the term “public”. For example, if you data files are
saved in a directory entitled “C:\Public\Data”, the ChromGate ®
Client/Server files saved in this directory can be overwritten.
Print Method Report
When this box is checked, the method report (or reports) will be printed at
the end of the run.