ChromeGate 3.3.2 Software Manual - KNAUER Advanced Scientific ...

16 Short guide ChromGate®, KNAUER Instrument Control
Fig. 9 Instrument Wizard
Select Create or modify a method to bring up the method window:
Fig. 10 Method Wizard
Click the appropriate button to present the Method window, which can be
edited as described in the section The Method Window.
If you are more familiar with the menus, you can ignore the wizard. If you
don’t want to start the Wizard always if you open the instrument, disable
the checkbox “Show at instrument startup”.
The Method Window
Overview
The Method window includes a tab for each instrument in the system on
which you can select the particular run parameters. The information on a
given tab is essentially the same as if you were to program the
component on a standalone basis. The reader should review information
about parameter selection that is provided in the instruction manual for
each module.
Pump Tabs
The Pump tab contains several areas where you can enter parameters
related to operating mode, control pressure limits, and flow programs.
The tab for the Smartline Pump 1000 is presented below (the tabs for
other pumps are very similar).