User's Manual - Kitagawa Europe

MAC mini iH Series Operation ManualProgram Operation5.6. Program copyThe program can be copied at between channels and on the single block.5.6.1.Program copybetween channelsThe programs can be copied at between channels.Though all programs inside of channels can be copied, the part of n-line ~ n-lineof block cannot be copied. ! Select the EDIT of program EDIT. Pushed for 2second or more.! Select the channel to be an original copy.! When the left keys are pushed for 2 seconds ormore, the screen of channel copy mode isdisplayed.Copy Mode Screen ! The right channel No. that is copyingdestination is deleted and the value can be set. ! Determines the channel No. of copydestination.! Starts the copy at between channels. Duringcopy, channels Nos., of copy source and copydestination flicker. After a long time, ENDis displayed and the program copy iscompleted. All programs in the channels are deleted and the N000 of select channel isdisplayed. When the program capacity of CHPRG DEL displayed duringprogram deletion is small, it may not be read because it is only displayed inthe blink of an eye.KITAGAWA O5-11