User's Manual - Kitagawa Europe

Key Switches & DisplayMAC mini iH Series Operation Manual! M/C zero positionreturn! Machining zeroreturn! Machining zeroposition setting ENABLE switch ENABLE switch Returns the table to M/C zero position.When the STATUS READY Aor READY Blamp lights, the table rotates to the M/C zero positionat high speed of PRM003.When STATUSREADY AorREADY B lampgoes out (PRM123=0), the M/C zero position is set atvalue set to PRM122.Returns the table to the machining zero position at thespeed set to PRM003.Sets the current position as the machining zeroposition.However, since the priority for keys is established, itis necessary to push the OINPUT key with thebORG key still pushed.! OverrideDisplays the current override state. Increases the override value.The increased value of override is set to PRM014. Reduces the override value.The reduced value of override is set to PRM014.# State display When the mode is set to “AUTO” or “MANUAL”with the override set to 100%, the mode LED lightsand with the override set to the point except 100%, itflickers.2.2.4.Automatic operationkeysThis key is for operating the program automatically.! Operation controlkeyENABLE switchExecutes the program operation.Or, restarts the program while stopping once.Stops the program once while executing.Rewinds the program of selected channel to return itto a top block.O2-4 KITAGAWA