User's Manual - Kitagawa Europe

MAC mini iH Series Operation ManualProgram4.5.16. (Block finish output (BLKFIN)/optional block finishoutput (G99FIN))The BLKFIN and G99FIN command (G98) outputs the BLKFIN and G99FIN.Program FormatG98 A F D JBoldface and italic type characters can beabbreviated.G98 BLKFIN/G99FIN output commandA Rotation angle Setting unit degSetting range 999.999Incremental0 359.999In absoluteF Rotation speed Setting unit 0.01min -1Setting range 03 9999D Equal dividing number Setting range 0 999J Program jump Setting range -1 999destinationJ-1 Subprogram return commandDescriptionAddresses A, F, D and J are the same as “Non-G code Type (Standard)”.Precautions on 2-axis spec. When commanding G98, 2-axis specifications are limited to the following items.! If G97 is commanded to another axis in the block that commands G98, Err962 EDIT ELLIAGAL G occurs.! If G97 is commanded to another axis in the block that commands G99, Err962 EDIT ELLIAGAL G occurs.Inadequate program examplePrg.G98-1 G98 is commanded to each axis and G97 toanother axis. /A/G98A360F0/B/G97A90F0 /A/G97A360F0/B/G98A90F0Prg.G98-2 G98 is commanded to each axis and G99 toanother axis. /A/G98A360F0/B/G99A90F0 /A/G99A360F0/B/G98A90F0KITAGAWA O4-41