User's Manual - Kitagawa Europe

Data CommunicationMAC mini iH Series Parameter・ExpansionManual7.3. Communicating parameter data using controllerThis section explains the procedures for parameter input/output communications, with externalequipment, using the communication function equipped on the controller.7.3.1.Parameter inputThis is to write parameters from an external equipment.Emergency stop state$ Push emergency stop button, or input externalemergency stop command to bring emergencystop state.$ Push aMODEa to select “PARAM”. $ Set “999” to PRM110 to bring all parameterrewritable state.$ The status is displayed being parameter inputmode.(Parameter input mode)$ The display shows the state being in theparameter download standby state.Data transmission fromexternal equipment(Parameter input standby)$ When the parameter numbers are counted upfrom “000” to the last number, the parameterinput ends, and the display prompts to turnthe power off.(Parameter input ended)Input the program to transmit according to the data format explained in thelater section of this instruction manual.Key in INPUT after parameter input is not necessary.Precautions1. Previous parameters are overwritten at the beginning of parameterforwarding. Save parameter data backup before input operation.2. After rewriting the parameters, turn off the power and reboot.P7-4 KITAGAWA