User's Manual - Kitagawa Europe

ProgramMAC mini iH Series Operation Manual4.2. Program area structureThe program in the controller manages the information of channels and blocks into the memory(EEPROM).Area structureThe operation program is stored in the area called the program area.The size of this storage area (program area) is fixed and the area has thecapacity of 2000-block.For this reason, the program can be created into the max. total capacity of2000-block.However, one channel (program block) cannot occupy all blocks. This programarea is divided into min. 2 channels ~ max. 90 channels.In the standard, this program area is divided into 16 channels.Dividing of program areaStandard Volume50 blocks are summed up to one lot.CH00 CH02 CH04 CH06 CH08 CH10 CH12 Ch14CH01 CH03 CH05 CH07 CH09 CH11 CH13 CH15In case of standard, the number of channels and the number of blocks aredetermined.CH00500-blockBlock Nos. N000N499CH01CH15100-blockBlock Nos. N000N099In case of extension, the number of channels and the number of blocks canbe changed optionally.However, maximum set values are as follows:Number of channels: 90 Number of blocks: 1000Extension Volume50 blocks are summed up to one lot. ExampleCH00 CH01CH00 CH04 CH08 CH12 CH16 CH20 CH24 CH26 CH28 CH30CH01 CH05 CH09 CH13 CH17 CH21 CH27CH02 CH06 CH10 CH14 CH18 CH22 CH29CH03 CH07 CH11 CH15 CH19 CH23 CH25To simplify the above, though 50 blocks are summed up to one lot, thenumber of channels can be set at 1 block unit.O4-2 KITAGAWA