User's Manual - Kitagawa Europe

Over Travel6.2.3.To release OVERTRAVELMAC mini iH Series Parameter・ExpansionManualThe safety avoidance direction when Err.031 OVER TRAVELoccurs isusual “side” and the releasing method to the safety avoidance direction is asfollows.However, the table does not shift in direction even if aINSa pushed. Push [RESET] button to reset Err.031. Set the mode to MANUAL. Shift the table in “direction” with aDELa of JOG key.When JOG operation is performed, pushing aHIa, the table rotates atrapid traverse.The safety avoidance direction when Err.032 OVER TRAVELoccurs isusual “side” and the releasing method to the safety avoidance direction is asfollows.However, the table does not shift in direction even if aDELa pushed. Push aRESETa button to reset Err.032.6.2.4.Forcedly shiftingmethod Set the mode to MANUAL. Shift the table in “direction” with aINSa of JOG key.When JOG operation is performed, pushing aHIa, the table rotates at rapidtraverse.When Err.031 OVER TRAVELoccurs, the forced shift in directionis as follows: Push aRESETa to reset Err.031. Set the mode to MANUAL. When pushing aINSa with OVR pushed, the table shifts in “direction” of danger direction.The forced shift of Err.032 OVER TRAVEL is as follows: Push RESET to reset Err.032. Set the mode to MANUAL. When pushing aDELa with aOVR pushed, the table shifts in “direction” of danger direction.The feedrate when the forced shift is performed is fixed at 0.5min -1 .Precautions 1. Do not use this forced shift mode usually.Because this forced shift is performed in a danger direction, whenperforming the operation unavoidably, check that the table does notinterfere or collide with any obstruction.P6-4 KITAGAWA