10.07.2015 Views

User's Manual - Kitagawa Europe

User's Manual - Kitagawa Europe

User's Manual - Kitagawa Europe

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

MAC mini iH Series Parameter・Expansion<strong>Manual</strong>External Channel Selection5.2. M-signal modeEach INPUT signal adds the value one by one, adds/subtracts the value 10 by 10 and clears thevalue to 00. The program channel can be selected by their combination.When the external channel is selected by the M-signal mode, CH00max. CH89 for the extensionchannel setting can be selected.5.2.1.Parameter settingWhen the external channel is selected by M-signal mode, set the parameter asshown below:PRM033=1 External channel is selected by M-signal mode.PRM112=1 External channel is selected.5.2.2.External I/O signalsI/O signals relative to the external channel selection of M-signal mode are asfollows:Input signals to show the channel No.! CHSEL0 ZERO SignalChannel No. cleared to 0.! CHSEL1 PLUS1 SignalChannel No. added one by one.! CHSEL2 PLUS10Channel No. added ten by ten.! CHSEL3 MINUS10Channel No. subtracted ten by ten.OUTPUT signal to show channel No. change finish.! BLKFIN Block finish signalKITAGAWA P5-3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!