User's Manual - Kitagawa Europe

MAC mini iH Series Operation ManualProgram4.5.14. WCRT SYS SETThe work coordinate system setting command (G92) can set that the current position is changed towhich position.Precautions The WZRN position set by G92 command can be changed by G92 command after that, or amanual WZRN position. The WZRN position data is not remained before change.Program FormatG92 A JBoldface and italic type characters can beabbreviated.G92 Work coordinate systemDescriptionsetting commandA Setting angle Setting unit ii degSetting range 0 359.999J Program jumpSetting range -1 999destinationJ-1 Subprogram return commandAddress A (Setting Angle)# The set-value of WZRN position can be changed by setting that the currentlystopped position is determined to which position.# When setting over the set range, the alarm of Err944 PROG A ERRORProgram A-address input erroroccurs.Address J is the same as “Non-G code Type (Standard)”.KITAGAWA O4-37