User's Manual - Kitagawa Europe

Program OperationMAC mini iH Series Operation Manual5.6.2.1 BLOCK COPY Copies and inserts the contents of selected block into the next block.1) MODE Select the 『EDIT』 of program EDIT.ENT Call the channel to be edited.2) 0 CH[**]3) - N[**]ENT Call the block to be copied.4)INS ENT When pushing 1INS , the block No., flickers.When pushing 1ENT , the block of the samecontents is copied into the next block.※ Shifts the block after the block that is not copied to the back one by one.At this time, the block No., of program contents that the block No., isspecified is automatically generated.Before block copyN000 G90 A90.000 F0N001 A180 ・・・・・・ AdditionN002 G27 P10 E12N003 G24 J0N010 G90 A15.000 F1000N011 A30.000 F2000N012 A45.000 F0After block copyN000 G90 A90.000 F0N001 A180.000N002 A180.000 ・・・・ Added blockN003 G27 P11 E13N004 G24 J0 Automatically generatedjump-destination No.N011 G90 A15.000 F1000N012 A30.000 F2000N013 A45.000 F0BLK No. after addition※ The final block of channel is forcedly deleted.※ When there is the program that the final block of channel is specified at thejump destination and the block is copied at front of its block, the alarm of『Err961 BLOCK INS ERROR』 occurs. Thus, the block is not copied.O5-12 KITAGAWA