User's Manual - Kitagawa Europe

ModeMAC mini iH Series Operation Manual3.2. Outline of mode3.2.1.Outline of mode Mode DescriptionAUTOAuto RunMANUALManual RunEDIT(Program EDIT)PARAM(Parameter)SINGLE(Single Run)# Operates the program edited by EDIT modeautomatically.# Executes the program block by block as often asa start signal is inputted.# Interlocks M-signal from an external start signal.# Rotates the circular table manually.# Performs a manual MZRN, manual WZRN andWZRN position setting.# Operates a manual pulse generator too.# Edits the program for automatic operation.# Inputs and outputs the program from/to theexternal equipment.# Communicates the programs to some personalcomputers with the data management software.(It is necessary to use the exclusive datamanagement software.)# Edits the parameters for operational conditionsand data setting required for controlling by thecontroller.# Inputs and outputs the parameters from/toexternal equipment.# Communicates the parameters to some personalcomputers with the data management software.(It is necessary to use the exclusive datamanagement software.)# Does not output a BLKFIN and a G99FIN incase of SINGLE mode though an operationcontent is the same as an AUTO mode.O3-2 KITAGAWA