User's Manual - Kitagawa Europe

OperationMAC mini iH Series Operation Manual6.4. OverrideThe following explains the steps to apply the override for the speed of the auto run or manualfeed.6.4.1.Override displayDisplay any override state for a command federate.! The percent (%) for the command speed isdisplayed on the right side of screen. The override display becomes effective whenAUTO or MANUALmode is selected.6.4.2.Override changeIncrease or reduce the override. ! The override is added as often as 1INS1 ispushed.When INCREASE is repeated, MAX isdisplayed and the mode becomes the rapidtraverse.! The override is reduced as often as 1DEL1 ispushed.The minimum set value of override is 20% . When the override is except 100% with AUTO or MANUAL mode selected, LED of each mode flickers.Precautions " The INCREASE or DECREASE every button pushing is set to PRM014and the initial set value is 5%.Even if the override is changed, since the set value of PRM003 (Rapidtraverse) is determined as upper limit, the set value more than its value isrestrained by the set value of PRM003.O6-6 KITAGAWA