User's Manual - Kitagawa Europe

MAC mini iH Series Parameter・ExpansionManualData Communication7.2.2.Interruption duringprogram inputThis is to stop program input in process. $ Program input is interrupted, and the displaygoes back to original EDIT screen.(Example: EDIT screen for CH05)The program forwarded is stored before the interruption.Previous program is cleared at the beginning of program forwarding.7.2.3.Program outputThis is to output a program in a selected channel to an external equipment.External equipmentstandby for download$ Prepare the external equipment ready toreceive transmitted data.$ Push aMODEa to select “EDIT”. $ Call out a desired channel to transmit theprogram to. (Only a channel number isdisplayed on the upper left of a screen.) $ The screen to display the program output modeis displayed.(Example: CH05 program output mode) $ With the key-in, program output in the channelis executed, and the number of block beingoutput is displayed as “CH out 000”.The completion of program output is displayedon the screen.(Example: CH05 program output ended)7.2.4.Interruption duringprogram outputThis is to stop program output in process. $ By pushing this key, program output isinterrupted, and the display is put back toEDIT screen.The programs forwarded to external equipment before the interruption areoutputted.KITAGAWA P7-3