User's Manual - Kitagawa Europe

Start-upMAC mini iH Series Operation Manual1.2. Screen Configuration in Start-upWhen the controller is started, the information and sum check situation for the controller aredisplayed on the screen and their contents are as follows:. Sum check situation of servo parameters. System information. EDIT information1.2.1.Sum check situationof servo parametersWhen the power is turned ON, the system checks that the servo parameter storedinto memory in previous power shutoff corresponds to the data set value.Because the set value varies when the servo amp., inside of controller is changedfor maintenance, the system encourages the resetting for servo amp., and alsogives warning so as to operate the machine in safety.Check Display for Servo ParameterWhen any FAULT occurs by the servo parameter check, the checked number(address) is displayed on the right side of PARAM CHECK on the screen.When nothing is displayed on the right side of PARAM CHECK , the servoparameter means the same content in the previous power shutoff.※ The servo parameter sum check function can change the content by theparameter. (For details, refer to the explanation of parameters.)1.2.2.System informationThe version of system program for the controller is displayed and the creationdate of software is also displayed on its right side.Version DisplayO1-2 KITAGAWA