User's Manual - Kitagawa Europe

SafetyMAC mini iH Series User’s Manual1. To Prevent Electric Shock Do not open the cover because any electric shock will be caused.DANGER(High voltage terminals and live parts are exposed in the controller andlive parts are remained even if the main power is turned OFF.) Check the voltage with the tester, etc., after the power is turned OFFbefore performing wiring work and inspection because the electric shockwill be caused. Perform the grounding work so that Grounding Resistance may become100 or less. Only qualified persons shall perform the wiring work and inspection. Never touch the equipment with wet hands because the electric shock willbe caused. Do not damage, pull cables forcedly, ride heavy thing on cables, and alsodo not pinch the cables because the electric shock will be caused Becauseelectric shock, burning and unexpected motion of machine will be caused. After power is turned OFF, never touch the terminal for 5 minutes becausethere is a possibility to get an electric shock through residual voltage.2. To Prevent FireCAUTION Install the MAC mini iH away from flammables.If the machine will be installed on flammables directly or near it, fire willbe caused. If the controller fails, turn OFF power because fire occurs if over-currentflows continuously.3. To Prevent DamageCAUTION Do not touch the movable parts of machine during operation. Apply only voltage specified in this manual to each terminal. Impropervoltage will cause the equipment damage. Do not connect terminal in mistake because the machine will be broken ordamaged. Do not touch the fan and other parts of the MAC mini iH because theybecome high temperature while the equipment is charged and shortly afterthe power is turned OFF.2 KITAGAWA