User's Manual - Kitagawa Europe

OperationMAC mini iH Series Operation Manual6.3. Manual runThe following explains the steps to operate the table manually by a MANUAL mode.6.3.1.Mode selection6.3.2.Axis selection6.3.3.Low speed JOG feedSelect the MANUAL mode to operate the table manually.! When pushing 1MODE1, the mode ischanged in order. Push this button severaltimes until MANUAL is selected (LEDlighting).In case of MAC mini iH2/iHT, the axis to be manually operated is selected.1A/B1 When pushing, A-axis and B-axis are ! changed.The LED selecting the axis lights.A low speed JOG feed is actuated by a manual run.+ENABLE switch! The table rotates in CW direction (Clockwise)with the button pushed.! The table rotates in CCW direction+ENABLE switch (Counterclockwise) with the button pushed. STATUS RUN LED lights during feed.Precautions " A low speed JOG federate is the set speed of PRM005.However, since the set value of PRM003 (Rapid traverse) is determined asupper limit, the set value more than its value is restrained by the set valueof PRM003." The machine can be manually operated only when the ENABLE switchis pushed.O6-4 KITAGAWA