User's Manual - Kitagawa Europe

MAC mini iH Series Parameter・Expansion Manual ParameterPRM390 [ NAME ] Channel/Block Structure Spec.[ MESSAGE] CH/BLOCK CONFIG SPEC【DATA RANGE】 : 0,1,2DescriptionSelects the spec., of channel/block structure.When the expansion channel function is used, the function to check whether the existedprogram fails or not for the newly set Channel/Block structure is selected toUSED/UNUSED.【 0 】 : Standard channel/block structureCH00:500 block, CH01~CH15:100 block structure【 1 】 : When Channel/Block are optionally set with the expansion channelfunction, the program is checked.【 2 】 : When Channel/Block are optionally set with the expansion channelfunction, the program is not checked.Concerned parameters PRM400~489For details, see『 Expansion Channel 』.PRM400 ~ [ NAME ]PRM489 [ MESSAGE]Number of Blocks every ChannelBLOCKS OF CH00 ~ BLOCKS OF CH89【DATA UNIT】 : BLOCK【DATA RANGE】 : 0~1000DescriptionPrecautionsWhen channels or blocks are changed with the expansion channel function, the number ofblocks is set every channel.1. In PRM390=1 or 2, this parameter becomes valid.2. The channel that the number of blocks is set to “0” and the channel after its channelcannot be selected.Concerned parameter PRM390For details, see 『 Expansion Channel 』.KITAGAWA P1-45