User's Manual - Kitagawa Europe

Over Travel6.1.3To release OVERTRAVELMAC mini iH Series Parameter・ExpansionManualThe safety direction when Err.031 OVER TRAVEL occurs is usual “side” and the releasing method to the safety direction is as follows.However, the table does not shift in direction even if aINSa is pushed. Set the mode to MANUAL. Shift the table in “direction” with aDELa of JOG key.When JOG operation is performed, pushing aHIa, the table rotates atrapid traverse.The safety direction when Err.032 OVER TRAVEL occurs is usual “side” and the releasing method to the safety direction is as follows.However, the table does not shift in direction even if aDELa is pushed.6.1.4.Forcedly shiftingmethod Set the mode to MANUAL. Shift the table in “direction” with aINS of JOG key.When JOG operation is performed, pushing aHIa, the table rotates atrapid traverse.When Err.031 OVER TRAVEL occurs, the forced shift in + direction isas follows: Set the mode to MANUAL. When pushing aINSa with aOVRa pushed, the table shifts in “direction” of danger direction.The forced shift of Err.032 OVER TRAVEL is as follows: Set the mode to MANUAL. When pushing aDEL with aOVRa pushed, the table shifts in “direction” of danger direction.The feedrate when the forced shift is performed is fixed at 0.5min -1 .Precautions 1. Do not use this forced shift mode usually.Because this forced shift is performed in a danger direction, whenperforming the operation unavoidably, check that the table does notinterfere or collide with any obstruction.P6-2 KITAGAWA