User's Manual - Kitagawa Europe

Key Switches & DisplayMAC mini iH Series Operation Manual2.1. Operation switches2.1.1.Power switch2.1.2.Emergency stopswitch2.1.3.ENABLE switchTurns ON the power of controller.When pushing the locker switch toside, the power is turned ON and toside, the power is turned OFF.This button is pushed when stopping the rotary table urgently.When the emergency stop button is pushed, the power to the servo is turned OFFand the rotary table stops urgently.When the emergency stop button is pushed, the table is self-held and it does notreturn automatically to the zero position. To release the emergency stop switch,manually turn the operation part to right.To release the emergency stop state, push RESET button manually afterreleasing the above operation to recover the circuit.The pendant is equipped with enable switch for 3 positions. When the manualoperation and automatic operation from the pendant are performed, place theenable switch to intermediate position.When the signal of enable switch is not detected (switch release or more pushed)while the machine is running, the machine stops immediately. Operation of 3-position enable switch• Switch is not pushed.・・・・・・・ Position 1: Switch OFF• Pushed to intermediate position.・・・・・・・ Position 2: Switch ON• Pushed over intermediate position.・・・・・・・ Position 3: Switch OFFENABLE switcPosition 1Position 2Position 3• Even if the switch is returned to position 2 from position 3, the switchdoes not turn ON.O2-2 KITAGAWA