User's Manual - Kitagawa Europe

MAC mini iH Series Parameter・Expansion Manual Parameter【 2 】 : MZRN External Start available Type 2The first External Start input signal, just after power turns on,implements MZRN. And then after Machine return to the origin, itautomatically switches to AUTO mode. Additionally, in this type ofMZRN, MANUAL mode still outputs the signals of both BLKFIN andZRNFIN.In case of 4 th and 5 th axes, the 4 th axis returns to the origin first and thenthe 5 th axis returns to the origin afterward.【 3 】 : MZRN External Start available Type 3The first External Start input signal, just after power turns on,implements MZRN. And then after Machine return to the origin, itautomatically switches to AUTO mode. Additionally, in this type ofMZRN, MANUAL mode still outputs the signals of both BLKFIN andZRNFIN.In case of 4 th and 5 th axes, the 5 th axis returns to the origin first and thenthe 4 th axis returns to the origin afterward.Precautions 1. When other measures, such as by Panel and External origin return, completesMZRN, this function becomes invalid.Concerned parameter PRM029PRM032 [ NAME ] Clamp Spec.[ MESSAGE] CLAMP SPEC【DATA RANGE】 : 0,1Description Selects whether the clamp mechanism of table is used or not.【 0 】 : Clamp mechanism used【 1 】 : Clamp mechanism unusedWhen the clamp mechanism is unused, the table becomes an unclampedstate usually.PRM033 [ NAME ] External Channel Spec.[ MESSAGE] EXT CH SPEC【DATA RANGE】 : 0,1Description Selects the method to select the program channel No. from external channels.【 0 】 : Rotary SW mode【 1 】 : M-signal modeConcerned parameters PRM112See the item of 『 EXT CH SPEC 』.KITAGAWA P1-27