User's Manual - Kitagawa Europe

MAC mini iH Series Maintenance ManualBattery for Absolute Encoder4 Battery for Absolute EncoderSpecificationsThe motor for MAC mini i is the absolute encoder and takes the back-up data with lithium battery.In case something happens on the lithium battery for data back-up, the encoder data disappears.When the voltage of the lithium battery becomes lower than the specified value, Error 830Encoder Battery Alarmappears and therefore, the lithium battery should be changed along with theinstruction below.Lithium Battery SpecificationsModel JZSP-BA01YASKAWA ELECTRIC Corp.BatteryER3V Toshiba Battery Corp.Specifications 3.6V 1000mAhOutside ViewHow to change Turn MAC mini i on, Take off the CB1i cable from the motor case and pull off the inside part of CB1i cable frominside the motor case. The battery is fixed on the inside part of CB1i cable. Take off the present battery from connector and put the new battery. Tighten up the battery on the cable with a band and put the CB1i cable connection back to asit is.RemarksThe original position for Machine should be re-set up, if changing thebattery would be carried out while turning MAC mini i off.KITAGAWA I4-1