Bid Package 08 North Well Field - Garney Construction

D. Assume full responsibility for the protection and safekeeping of products stored at the Site.
E. Store products at locations acceptable to the CMAR/Engineer and to allow Owner access to
maintain and operate existing facilities.
F. Store products in accordance with the Supplier's storage instructions immediately upon
delivery. Leave seals and labels intact. Arrange storage to allow access for maintenance of
stored items and for inspection. Store unpacked and loose products on shelves, in bins, or
in neat groups of like items.
G. Obtain and pay for the use of any additional storage areas as needed for construction. Store
products subject to damage by elements in substantial weather-tight enclosures or storage
sheds. Provide and maintain storage sheds as required for the protection of products.
Provide temperature, humidity control and ventilation within the ranges stated in the
Supplier's instructions. Remove storage facilities at the completion of the Project.
H. Protect the pipe interior. Keep all foreign materials such as dirt, debris, animals, or other
objects out of the pipe during the Work. Cap or plug ends of installed pipe in an approved
manner when pipe is not being installed. Clean or wash out pipe sections that become
contaminated before continuing with installation. Take precautions to prevent the pipe
from floating or moving out of the proper position during or after laying operations.
Immediately correct any pipe that moves from its correct position.
I. Provide adequate exterior storage for products that may be stored out-of-doors.
1. Provide substantial platforms, blocking, or skids to support materials and products
above ground; slope to provide drainage. Protect products from soiling or staining.
2. Cover products subject to dislocation or deterioration from exposure to the elements,
with impervious sheet materials. Provide ventilation to prevent condensation below
covering.
3. Store loose, granular materials on clean, solid surfaces, or on rigid sheet materials, to
prevent mixing with foreign matter.
4. Provide surface drainage to prevent erosion and ponding of water.
5. Prevent mixing of refuse or chemically injurious materials or liquids with stored
materials.
6. Pipes and conduits stored outdoors are to have open ends sealed to prevent the
entrance of dirt, moisture, and other injurious materials. Protect PVC pipe from
ultraviolet light exposure.
7. Store light weight products to prevent wind damage.
J. Protect and maintain mechanical and electrical equipment in storage.
1. Provide Supplier's service instructions on the exterior of the package.
2. Service equipment on a regular basis as recommended by the Supplier. Maintain a log
of maintenance services. Submit the log as Record Data at the completion of the
Project.
3. Provide power to and energize space heaters for all equipment for which these devices
are provided.
4. Provide temporary enclosures for all electrical equipment, including electrical systems
on mechanical devices. Provide and maintain heat in the enclosures until equipment is
energized.
Project Management and Coordination – Bid Package #8 01 31 00-7
Colorado River Municipal Water District
Ward County Water Supply Expansion Project – North Well Field
5/24/2012