Bid Package 08 North Well Field - Garney Construction

e. Cost proposal, when applicable.
7. Alternatives to cutting and patching.
8. Written authorization from any separate contractor whose work would be affected.
9. Date and time work will be uncovered or altered.
D. Examine the existing conditions, including structures subject to damage or to movement
during cutting or patching.
1. Inspect conditions affecting installation of products or performance of the work after
uncovering the work.
2. Provide a written report of unacceptable or questionable conditions to the
CMAR/Engineer. The BIDDER shall not proceed with work until CMAR/Engineer has
provided further instructions. Beginning work will constitute acceptance of existing
conditions by the BIDDER.
E. Protect the structure and other parts of the work and provide adequate support to maintain
the structural integrity of the affected portions of the work. Provide devices and methods
to protect adjacent work and other portions of the project from damage. Provide
protection from the weather for portions of the project that may be exposed by cutting and
patching work.
F. Execute cutting and demolition by methods which will prevent damage to other work, and
will provide proper surfaces to receive installation of repairs.
G. Execute fitting and adjustment of products to provide a finished installation to comply with
specified products, functions, tolerances, and finishes.
H. Cut, remove, and legally dispose of selected mechanical equipment, components, and
materials as indicated, including but not limited to, the removal of mechanical piping,
heating units, plumbing fixtures and trim, and other mechanical items made obsolete by the
modified work.
I. Restore work which has been cut or removed. Install new products to provide completed
work per the Contract Documents.
J. Fit work air-tight to pipes, sleeves, ducts, conduit, and other penetrations through the
surfaces. Where fire rated separations are penetrated, fill the space around the pipe or
insert with materials with physical characteristics equivalent to fire resistance requirements
of penetrated surface.
K. Patch finished surfaces and building components using new products specified for the
original installation.
L. Refinish entire surfaces as necessary to provide an even finish to match adjacent finishes:
1. For continuous surfaces, refinish to the nearest intersection.
2. For an assembly, refinish the entire unit.
1.21 PRELIMINARY OCCUPANCY
A. Owner may deliver, install and connect equipment, furnishings, or other apparatus in
buildings or other structures. These actions do not indicate acceptance of any part of the
building or structure and does not affect the start of warranties or correction periods.
B. Protect the Owner's property after installation is complete.
Project Management and Coordination – Bid Package #8 01 31 00-10
Colorado River Municipal Water District
Ward County Water Supply Expansion Project – North Well Field
5/24/2012