25.10.2014 Views

Bid Package 08 North Well Field - Garney Construction

Bid Package 08 North Well Field - Garney Construction

Bid Package 08 North Well Field - Garney Construction

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

40 90 00 INSTRUMENTATION AND CONTROL FOR PROCESS SYSTEMS<br />

1.00 GENERAL<br />

1.01 SCOPE<br />

A. General Requirements for Instrumentation and Control.<br />

1. There are two areas of work in the Instrumentation Work in this project as described<br />

below:<br />

a. The Instrumentation System Integrator Contractor shall provide all hardware,<br />

software, and configuration and integration associated with the PLC based<br />

Instrumentation and Process Control system. Provide a complete and operational<br />

system in accordance with these Contract Documents:<br />

1) Provide instrumentation, hardware, conductors and raceway required for a<br />

complete and operable system that is above that specified in the Contract<br />

Documents. Provide all labor and materials specified in the Contract<br />

Documents.<br />

b. Provide all required labor, materials and PLC programming and system<br />

configuration and integration to interconnect the I/O as required per the project to<br />

the RTUs (provided under this contract) at the:<br />

1) Transmission Pump Station (TPS),<br />

2) Odessa Pump Station (OPS),<br />

3) <strong>Well</strong> <strong>Field</strong> Pump Station (WPS)<br />

4) Big Spring Pump Station (BPS)<br />

5) And 21 <strong>Well</strong> <strong>Field</strong> stations Sites: Sites D1, D2, D3, D4, D6, D8, D9, D10, D11,<br />

D12, D13, D14, D15, D16, D17, D18, D20, D21, D22, D23 & D24<br />

6) For the locations listed above:<br />

a) Provide all required software and programming in each of the PLCs and<br />

existing computer system for a complete and operational system in<br />

accordance with these Contract Documents.<br />

b) Coordinate and fully cooperate with the OWNER to provide all required<br />

hardware and PLC hardware and PLC programming necessary to interface<br />

with the existing system.<br />

c) Provide personnel to check out, test and commission the system.<br />

d) Provide factory trained personnel to train the OWNER's staff as specified.<br />

e) Provide software programming to create new screens and modify existing<br />

screens on the Graphic User Interface located at each RTU Panel as<br />

specified.<br />

f) Provide the required drivers, if required, to receive and transmit data over<br />

the specified radio system to fully communicate with the PLC systems.<br />

1<br />

Instrumentation and Control for Process Systems 40 90 00-1<br />

CMD11269 – Ward County Transmission System Expansion – Contract C – Above Slab TPS, OPS, and WPS

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!