Bid Package 08 North Well Field - Garney Construction

1
b. Provide all required labor, materials and PLC programming and system
configuration and integration to interconnect the new PLC via the ethernet Radio
System to the existing computer system at the OWNER’s main control station at
the Water Treatment Plant.
5. Big Spring Pump Station (BPS):
a. Provide one (1) PLC. The PLC shall be located at the Pump Station building in a RTU
cabinet. The PLC shall be connected to a ProSoft 2.4GHz radio via RS232 cable.
The cable shall be connected to a Yagi antenna via 1/2” coaxial cable. The radio
shall transmit/receive data from CRMWD’s existing main control station.
b. Provide all required labor, materials and PLC programming and system
configuration and integration to interconnect the new PLC via the 2.4GHz Radio
System to the existing computer system at the OWNER’s main control station at
the Water Treatment Plant.
6. Well Sites Stations (typ. of 21 sites):
a. Provide one (1) PLC. The PLC shall be located in a RTU cabinet at the site. The PLC
shall be connected to an Ubiquiti Bullet2 ethernet radio via RS232 cable. The
cable shall be connected to a Yagi antenna via 1/2” coaxial cable. The radio shall
transmit/receive data from CRMWD’s existing main control station, via the Well
Field Pump Station site.
b. Provide all required labor, materials and PLC programming and system
configuration and integration to interconnect the new PLC via the ethernet Radio
System to the existing computer system at the OWNER’s main control station at
the Water Treatment Plant.
c. The RTU Cabinet at each well site shall be installed by others under a separate Bid
Package (the Well Site Contractor).
7. Modify existing PLCs at the Owner’s main site as required.
8. Provide all required software and programming in the PLCs and existing computer
system for a complete and operational system in accordance with these Contract
Documents.
9. Coordinate and fully cooperate with the Owner to provide all required hardware and
PLC hardware and PLC programming necessary to interface with the existing system.
10. Provide personnel to check out, test and commission the system.
11. Provide personnel to train the Owner's staff as specified.
12. Provide software programming to create new screens and modify existing screens on
the existing computer system as specified.
13. Provide the required drivers to receive and transmit data over the specified Radio
System to fully communicate with the PLC system. Provide the required drivers at TPS
and Base 21 to receive and transmit data over the specified fiber optic cable system to
fully communicate with the PLC System. The fiber optic system shall be as specified in
Section 27 15 23 “Communications Optical Fiber Horizontal Cabling”.
Supervisory Control and Data Acquisition (SCADA) System 40 90 02-2
CMD11269 – Ward County Transmission System Expansion – Contract C – Above Slab TPS, OPS, and WPS