Bid Package 08 North Well Field - Garney Construction

Specifications or details do not need to be indicated or specified in each specification
or drawing. Items shown in the contract documents are applicable regardless of
location in the Contract Documents.
3. Standard paragraph titles and other identifications of subject matter in the
specifications are intended to aid in locating and recognizing various requirements of
the specifications. Titles do not define, limit, or otherwise restrict specification text.”
B. Add new paragraphs “D ‐ F” as follows:
“D. Comply with the most stringent requirements where compliance with two or more
standards is specified, and they establish different or conflicting requirements for
minimum quantities or quality levels, unless Contract Documents indicate otherwise.
1. Quantity or quality level shown or indicated shall be the minimum to be provided
or performed in every instance.
2. Actual installation must meet or exceed the minimum quality indicated.
3. In complying with these requirements, indicated numeric values are minimum or
maximum values, as noted, or appropriate for context of requirements.
4. Refer instances of uncertainty to the CMAR/Engineer for a decision before
proceeding.
E. Provide materials and equipment comparable in quality to similar materials and
equipment incorporated in the project or as required to meet the minimum
requirements of the application if the materials and equipment are shown in the
drawings but are not included in the specifications.
F. The Contract Documents comprise the entire Agreement between Bidderr and CMAR.
The Contract Documents may be modified only by Field Order, Change Order or
Written Amendment.”
SC‐3.02
Make the following modifications to 3.02 Reference Standards
A. Add a new paragraph “B” as follows:
“B. Comply with applicable construction industry standards as if bound or copied directly
into the Contract Documents regardless of lack of reference in the Contract
Documents. Apply provisions of the Contract Documents where Contract Documents
include more stringent requirements than these referenced standards.
1. Standards referenced directly in the Contract Documents take precedence over
standards that are not referenced but recognized in the construction industry as
applicable.
2. Comply with standards not referenced but recognized in the construction industry
as applicable for performance of the work except as otherwise limited by the
Contract Documents. The Engineer determines whether code or standard is
applicable, or which of several are applicable.
Supplementary Conditions (Revised per Garney)
Colorado River Municipal Water District
Ward County Water Supply Expansion Project - Pump Stations 00 73 00 - 5
12/28/2011