25.10.2014 Views

Bid Package 08 North Well Field - Garney Construction

Bid Package 08 North Well Field - Garney Construction

Bid Package 08 North Well Field - Garney Construction

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Colorado River Municipal Water District<br />

Raw Water Supply <strong>Well</strong> Sites<br />

Ward County <strong>North</strong> <strong>Well</strong> <strong>Field</strong><br />

SECTION 26 05 00<br />

COMMON WORK RESULTS FOR ELECTRICAL<br />

PART 1 GENERAL<br />

1.1 WORK INCLUDED<br />

A. Furnish labor, materials, equipment and incidentals necessary for complete and<br />

operational electrical systems, as specified herein.<br />

B. This Section, as well as Division 1, concerns all other Sections in Division 26, and shall<br />

be considered a part of each of those Sections as if written in their entirety.<br />

1.2 QUALITY ASSURANCE<br />

A. Electrical Contractors' Qualifications<br />

1. Use adequate numbers of skilled workmen, trained and experienced in their crafts,<br />

and who are familiar with the specifications and methods of performing the work<br />

in this Division. A licensed Journeyman shall be on site at all times when<br />

electrical work is being performed. Electrical work shall be performed under the<br />

direct supervision of a Master Electrician who holds a valid license in the State of<br />

Texas. The Contractor shall provide a monthly report to the Owner/Engineer for<br />

review stating that the Master Electrician has been to the job site and thoroughly<br />

reviewed the work. The report shall be signed by the Master Electrician and<br />

include the data and time the Master Electrician was on site.<br />

B. Workmanship<br />

1. Work shall be performed in accordance with quality, commercial practices. The<br />

appearance of finished work shall be of equal importance with its operation.<br />

Materials and equipment shall be installed based upon the actual dimensions and<br />

conditions at the project site. Locations for materials or equipment requiring an<br />

exact fit shall be field measured. Conduit and motors shall be isolated to avoid<br />

unacceptable noise levels from objectionable vibrations from all systems.<br />

1.3 SUBMITTALS<br />

A. Submittals shall be separated by specification section and shall not be combined with any<br />

submittals for a separate specification section. Submittals shall be in accordance with<br />

Section 01 33 00, “Submittal Procedures” and shall include:<br />

1. Component catalog number and manufacturing data sheet, indicating pertinent<br />

data and identifying each component by the item number and nomenclature as<br />

specified.<br />

2. Component drawings showing dimensions, mounting, and external connection<br />

details in AutoCAD format.<br />

May 18, 2012<br />

Common Work Results for Electrical<br />

Revision 0 26 05 00-1

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!